Wall Systems
Utilizing the most advanced coatiings and moisture control technologies available today, Total Wall wall
systems represent the cutting edge of cladding design and integrity.
|
|
|
For an alphabetized list of the complete Total Wall product line in printer friendly PDF format click here.
Not sure which Total Wall product you need? Use the Product Application Guide.
Download
the free Acrobat
Reader
|
| Total
Wall Moisture Drainage MD |
Non-bearing exterior
cladding used to
weather-proof, beautify
and insulate any
commercial or residential structure with
moisture sensitive sheathing or framing.
|
- Includes a drainage
channel to allow incidental water
to safely exit the
wall system
- Light weight and
will not stress
the design structure
- Does not consume
interior space
- Takes advantage
of the "mass effect" of the
structure
- Highly energy efficient
insulating properties
- Easily accessorized
with architectural enhancements
- Practically any
combination of color or texture can
be achieved
|
|
Applicable
Substrates
Substrates: Exterior Gypsum, OSB, Plywood, DensGlass, GlasRoc, Aquatough, Permabase, Durock, Hardiboard, CMU, Brick and concrete.
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained
at or above 40 degrees Fahrenheit.
Freshly applied products must
be protected from precipitation.
|
|
|
|
|
|
|
|
| Soft Coat PB |
| Non-bearing exterior cladding used to
weatherproof, beautify and insulate any commercial
and selected residential structures. |
- Light weight and will not stress
the
design structure
- Does not consume interior
space
- Takes advantage of the "mass
effect" of the structure
- Highly energy efficient
insulating properties
- Easily accessorized
with architectural enhancements
- Practically any combination
of color or texture can be achieved
|
|
Applicable
Substrates
Substrates: DensGlass, GlasRoc, Aquatough, Permabase, Durock, Hardiboard, CMU, Brick and concrete.
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained at or above 40 degrees Fahrenheit.
Freshly applied products must be
protected from precipitation.
|
|
|
|
|
|
|
|
| Direct Applied DA |
| A low cost,high performance coating
for exterior or interior service which
simulates the look and feel of textured
natural masonry. |
- Does not require the use of rigid foam
insulation
- Does not consume interior
space
- Excellent performance
and weather protection
- Low cost of materials
and labor relative to comparable systems
- Easily accessorized
with architectural enhancements
- Practically any combination
of color or texture can be achieved
|
|
Applicable
Substrates
Substrates: DensGlass, GlasRoc and Aquatough for protected areas. Permabase, Durock or masonry for exterior exposed
wall areas.
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained at or above 40 degrees Fahrenheit.
Freshly applied products must
be protected from precipitation.
|
|
|
|
|
|
|
|
|
| Hard Coat PM |
| A non-bearing exterior
cladding used to weatherproof, beautify
and insulate commercial
and residential structures. |
- High resistance
to sharp impact damage
- Solid mechanical attachment
- Excellent performance
and weather protection
- Highly energy efficient,
takes advantage of the "mass effect" of
the structure
- The exterior insulation
tends to move the dew point toward the
outside of the wall
- Easily accessorized
with architectural enhancements
- Practically any combination
of color or texture can be achieved
|
|
Applicable
Substrates
Substrates: DensGlass, GlasRoc, Aquatough, Permabase, Durock, Hardiboard, CMU, Brick and concrete.
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained at or above 40 degrees Fahrenheit.
Freshly applied products must
be protected from precipitation.
|
|
|
|
|
|
|
|
| Polyiso PI |
| A non-bearing exterior
cladding used to weatherproof, beautify
and insulate commercial
and residential structures. |
- Highly energy efficient,
takes advantage of the "mass effect" of
the structure
- The exterior insulation
tends to move the dew point toward the
outside of the wall
- Easily accessorized
with architectural enhancements
- Practically any combination
of color or texture can be achieved
|
|
Applicable
Substrates
Substrates: DensGlass, GlasRoc and Aquatough, Permabase, or Durock
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained at or above 40 degrees Fahrenheit.
Freshly applied products must
be protected from precipitation.
|
|
|
|
|
|
|
|
| StrongHold ICF |
| A reinforced multi-layered
lamina specifically designed for all insulated
concrete forms. |
- Installs easily
and quickly without the need for fasteners,
adhesives, control
joints or trim accessories
- Provides impact protection
to ICF surfaces
- Blocks all ultra-violet
radiation and halts deterioration of
ICF block
- Weatherproofs and
beautifies the ICF wall
- Easily accessorized
with architectural enhancements
- Practically any combination
of color or texture can be achieved
|
|
Applicable
Substrates
Insulated Concrete Forms
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained at or above 40 degrees Fahrenheit.
Freshly applied products must
be protected from precipitation.
|
|
|
|
|
|
|
|
| SL Gold |
| A non-bearing exterior cladding
used to weatherproof, beautify and insulate
commercial and residential structures. |
- Highly impact resistant
- Highly energy efficient
- Employs a moisture
barrier for residential applications
- Light weight and will
not stress the design structure
- Easily accessorized
with architectural enhancements
- Practically any combination
of color or texture can be achieved
|
|
Applicable
Substrates
Substrates: DensGlass, GlasRoc, Aquatough, Permabase, Durock, Hardiboard, CMU, Brick and concrete.
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained at or above 40 degrees Fahrenheit.
Freshly applied products must
be protected from precipitation.
|
|
|
|
|
|
|
|
| Total One Coat Stucco |
| Dry mix containing Portland
cement, chopped strand fiberglass reinforcement,
graded aggregates, and specialty
modifiers designed to enhance workability
and cure. |
- Requires only water
be added
- One coat, hi-lift
stucco
- Available in 80 pound
bags
- May be top coated
with finish coats
|
|
Applicable
Substrates
Substrates: Exterior Gypsum, OSB, Plywood, DensGlass, GlasRoc, Aquatough,
Permabase, Durock, Hardiboard, CMU, Brick and concrete.
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained at or above 40 degrees Fahrenheit.
Freshly applied products must
be protected from precipitation.
|
|
|
|
|
|
|
|
| Premium Fibered Stucco |
| Dry mix containing Portland
cement, chopped strand fiberglass reinforcement,
micro-fibers for added strength and crack
resistance, graded aggregates, and specialty
modifiers designed to enhance workability
and cure. |
- Requires only water
be added
- One coat, hi-lift
stucco
- Available in 50 pound
bags
- May be top coated
with finish coats
|
|
Applicable
Substrates
Substrates: Exterior Gypsum, OSB, Plywood, DensGlass, GlasRoc, Aquatough,
Permabase, Durock, Hardiboard, CMU, Brick and concrete.
Limitations: Application
by Total Wall approved applicators only.
Application: Temperature must be maintained at or above 40 degrees Fahrenheit.
Freshly applied products must
be protected from precipitation.
|
|
|
|
|
|
|
|
Download
the free Acrobat
Reader. Download Autodesk I-Drop
plug-in .Return
to menu
|
